BT-605A Current Clamp

UPC:754407496071

Title:BTMETER BT-605A AC/DC 600A Clamp-on Current Probe Amp Adapter for Work with Digital Multimeters

• 【AC/DC 600A Clamp-on Probe】Capable of measuring AC/DC up to 600 amps, This clamp adapter is built for higher current measurement.
• 【Great Companion to DMMs】1mV per ampere output & standard 3/4 inch banana plugs makes it compatible with most multitesters that features with 1mV sensitivity.
• 【Accurate Ampere Measurement】+/- 3.0%+10 accuracy for signal output conversion. The arrow on the Jaw indicates the DC current direction of positive current flow ( from positive to negative)
• 【Easy to Use】Maximum Jaw Caliber Size up to 1.77 inches (45mm), allows you to make accurate AC or DC amperage measurement up to 600 amps without breaking the circuit.
• 【Tips】Putting an amp-clamp on a power cord wouldn’t get a reading, you’ll need to put an amp clamp around the live wire only, or use an “AC line splitter”. 9V battery included, 12-month warranty for worry-free purchase.

  ---

  BTMETER BT-605A AC/DC Current Clamp Probe

  Great add-on of most digital multimeter for measuring ampere

• Adapting standard output banana plugs, this amperage clamp-on meter is compatible with most digital current testers. It enables your multitester measures current data up to 600A and allows your oscilloscope measures ampere waveform accurately.
• No need to break the circuit for amps measuring. Just clamp the big jaw caliber around one conductor under measured and get readings on multimeter.
• KINDLY REMINDER: Clamp on only ONE wire, or different direction current will offset and get wrong result.

  Specifications:

• DC Current: 600 A
• AC Current: 600 A
• Jaw Caliber: 1.77 inch
• Output Conversion: 1mV/1A
• Conversion Accuracy: +/- 3.0% + 5 digits
• Output Impedance: 10K
• Dimension: 7.05*3.54*1.42 inch

  Operation Instructions:

• Perfectly work with BTMETER multimeters, such as: BT-770M, BT-770N, BT-770K, BT-90EPD, BT-90EPC, BT-6688G, BT-6688H, etc.
• When perform DC current measurement, always press “REL” key on multimeter to zeroes it out.
• When perform AC current measurement, always use the clamp go round the live wire only, or use "AC line splitter"
• Connect the black banana plug of the BT-605A AC/DC Current Clamp Adapter to "COM" port and the red banana plug to the "µA mA" port.
• Press “SELECT” button on the multimeter and press AC/DC button on the Clamp Adapter to choose “DC” or “AC” measurement .
• The arrow on the right side of the Jaw indicates the DC current direction of positive current flow (from positive to negative).

• ---